چکیده

In this research activity, we report the possibility of a 3D object holography using two object beams in addition with a reference beam. In this experiment, a laser beam was split into 3 beams using two beam splitters. All three beams were expanded via a set of two convex lenses in a setup similar to a simple telescope. One of the beams was directed to the photographic plate as a reference beam. The other two beams were shined onto the object from two different angles using mirrors. After developing the photographic plate, the obtained hologram were placed in front of a reference laser beam for reconstructing the images. It has been observed that the virtual image of the object could be seen from two different angles.

کليدواژه ها

Holography, Hologram recording, Image reconstruction, 3D Object, Object beam

کد مقاله / لینک ثابت به این مقاله

برای لینک دهی به این مقاله، می توانید از لینک زیر استفاده نمایید. این لینک همیشه ثابت است :

نحوه استناد به مقاله

در صورتی که می خواهید در اثر پژوهشی خود به این مقاله ارجاع دهید، به سادگی می توانید از عبارت زیر در بخش منابع و مراجع استفاده نمایید:
Hamid R. Mashayekhi , 1401 , Experimental research on the possibility of 3-D object holography using dual object beam , دومین کنفرانس بین المللی هولوگرافی و کاربردهای آن